When Amp was first released on the market, there was a lot of buzz around it. Many people had high hopes for this device and were excited to see how it would improve their viewing experience. However, there were some who were hesitant to purchase one, afraid they wouldn’t be able to use it effectively. If you are reading this article, you probably fall into the latter category. Maybe you purchased an Amp with the intentions of using it, but you’re just not sure how or where to set it up so that it works as intended. Since this is such a common issue among those who own an Amp, we put together a quick guide on how to use your remote wirelessly and how to turn on the Amp without a remote.
How To Turn On Amp Without Remote Wire?
1. Using the Wirelessly-Enabled Remote to Turn on Amp
Once you have your remote plugged into the back of your Amp, you will be able to control the volume, inputs, and power for your device using your remote. If you want to use your remote to turn on your Amp, you can do this in one of two ways: – Press the “input select” button (the button with the TV icon) until the display reads “TV”. Then, press the “power” button (the one with the house icon) to turn on your Amp. – Press the “input select” button (the button with the TV icon) until the display reads “TV”. Then, hold the “power” button down for two seconds.
2. Using a Smartphone to Turn on Amp
If you downloaded the Logitech app on your phone, you’ll be able to use it to control your Amp. With your Amp turned on, open up the Logitech app and click on “devices”. You’ll see a list of all the devices you’ve connected to your account. You can then click on your Amp and use the app to control everything the remote can do.
3. Using the Remote Without a Cable to Turn on Amp
If you don’t have a cable for your remote, you can still use it to turn on your Amp. If you connect your remote wirelessly, then you’ll be able to use it to turn on your Amp. You can also use the remote without any cable if you have an older version of the remote that came with an IR blaster. This is not recommended, as this method will reduce the battery life for both your Amp and remote. If you have an older version of the remote that came with an IR blaster, you can download this app from Logitech. This app will allow you to control all of your devices using a regular smartphone or tablet.
4. Turning on Amp with a Cable
If you have a cable for your remote, then you’ll be able to turn on your Amp using the cable. To do this, connect the remote to your Amp in the same way you would if it were wireless. Once you have connected the remote to your Amp, hold down the “input select” button until the display reads “TV”. Then, press and hold down both arrow buttons (the arrows pointing up and down) for two seconds until your Amp turns on.
5. Turning on Amp with an IR Blaster
If you have an older version of the remote that came with an IR blaster, you can still use your remote to turn on your Amp. To do this, connect the remote to your Amp in the same way you would if it were wireless. Once you have connected the remote to your Amp, hold down the “input select” button until the display reads “TV”. Then, press and hold down both arrow buttons (the arrows pointing up and down) for two seconds until your Amp turns on. If you don’t have a cable for your remote, then you can still use it to turn on your Amp by holding down both arrows for two seconds until it turns on. This will only work with older versions of the remote that came with an IR blaster. If you have a newer version of the remote that has an IR blaster built-in, then this method will not work because there is no longer an IR blaster built into newer versions of the remote.
How To Turn On A Samsung Soundbar With The TV Remote?
- Turn off the TV. If you have an older version of the remote that came with your soundbar, then hold down both arrow buttons for two seconds until it turns off. If you have a newer version of the remote that has an IR blaster built-in, then hold down both arrows for two seconds until it turns off.
- Turn on your soundbar by holding down the input select button until it says “TV”
- Press and hold the input select button again until it says “Source”
- Press and hold the input select button again until it says “Sound”
- Press and hold both arrow buttons (the arrows pointing up and down) for two seconds until your Soundbar turns on
6 You may need to press both arrow buttons once more if there is no picture or sound coming from your Sound Bar
7 The next time you want to turn off your Sound Bar, press and hold both arrow buttons (the arrows pointing up and down) for two seconds again
8 If you are using an older version of the remote that came with your Sound Bar, then this will not work because there is no longer an IR blaster built into newer versions of the remote 9 You can also use the TV remote to turn on and off your Samsung Sound Bar by holding down both arrows for two seconds
- If you have a newer version of the remote that has an IR blaster built-in, then this will not work because there is no longer an IR blaster built into newer versions of the remote.
10 If you want to use your TV remote to turn on and off your Samsung Sound Bar, then press and hold both arrow buttons (the arrows pointing up and down) for two seconds until it turns on.
Bottom Line
Amp is a great device that can transform your TV into a smart device. However, you can’t use it unless you turn it on. Fortunately, there are several ways to do this, whether you are using a remote or your phone. However, before you turn on your Amp, make sure you’ve placed your device properly. If you have any questions about using your Amp, don’t hesitate to contact customer service.
