When it comes to vinyl records, some people only think of their sound quality. But what a lot of people don’t know is that you can also get creative with them! After all, where there’s one type of art, there’s almost always another one waiting in the wings. So if you love your vinyl records and want to take your appreciation for them to another level, then check out this post. Today we’ll be going over how to cut vinyl records so that you can use them in creative new ways. Read on for more!
How To Cut Vinyl Records?
- First, you need to get a clean and sharp knife.
- Prepare the surface of the record by cutting off any dust, dirt, or debris that might be stuck on the surface of the record.
- Place your vinyl record on a flat and smooth surface so that you can cut it into pieces with ease. You can use an old CD case or a small piece of wood to support your vinyl record while cutting it into pieces.
- You can also cut your vinyl records using a kitchen knife as long as you’re sure it’s sharp enough to do the job right away!
- Once you’re sure that your vinyl is ready to be sliced into pieces, take out your kitchen knife and place it at an angle on one of the edges of your vinyl record so that you’ll be able to cut along it easily without damaging the face or backside of your vinyl either way!
- Starting from one side, gently pull off any dust, dirt, or debris that might be stuck on the surface of your vinyl.
- Once you’ve made a cut along the edge, gently lift up and away from your vinyl record.
- Repeat step 7 for each side of your vinyl record until it’s completely cut into pieces!
- Now that you’ve sliced off all the pieces of your vinyl record, you can safely dispose of or recycle any remaining pieces that you don’t need to keep or use anymore!
- Now that you’ve cut your vinyl record into pieces, you can take them to a local music shop or record store where they can help you put the vinyl back together in the way that you like it!
- If for any reason your vinyl record doesn’t look exactly like it did before you cut it into pieces, don’t worry! You can always use a small piece of tape or glue to stick the pieces that don’t look exactly like they used to be together back together again!
- There are many different ways to put your vinyl records back together again, but most people prefer putting them together in the way that was originally intended by the artist who created the original vinyl record!
What Is Vinyl Record Cutting?
Vinyl record cutting is the process of physically altering records. This can be done by hand or by using a computer-controlled record-cutting machine. Vinyl record cutting is most commonly used to produce a single record or a small number of records. Vinyl record cutting is different from vinyl disc cutting. Vinyl disc cutting is the process of creating vinyl records from a digital audio source.
How To Cut Vinyl Records: Step-By-Step Instructions To Get The Job Done!
- First, you need to get a clean and sharp knife.
- Prepare the surface of the record by cutting off any dust, dirt, or debris that might be stuck on the surface of the record.
- Place your vinyl record on a flat and smooth surface so that you can cut it into pieces with ease. You can use an old CD case or a small piece of wood to support your vinyl record while cutting it into pieces.
- You can also cut your vinyl records using a kitchen knife as long as you’re sure it’s sharp enough to do the job right away!
- Once you’re sure that your vinyl is ready to be sliced into pieces, take out your kitchen knife and place it at an angle on one of the edges of your vinyl record so that you’ll be able to cut along it easily without damaging the face or backside of your vinyl either way!
- Starting from one side, gently pull off any dust, dirt, or debris that might be stuck on the surface of your vinyl.
- Once you’ve made a cut along the edge, gently lift up and away from your vinyl record.
- Repeat step 7 for each side of your vinyl record until it’s completely cut into pieces!
- Now that you’ve sliced off all the pieces of your vinyl record, you can safely dispose of or recycle any remaining pieces that you don’t need to keep or use anymore!
- Now that you’ve cut your vinyl record into pieces, you can take them to a local music shop or record store where they can help you put the vinyl back together in the way that you like it!
Vinyl Disc Cutting Basics
- Vinyl disc cutting is the process of creating vinyl records from a digital audio source. The process of vinyl disc cutting differs from vinyl record cutting in that when using a vinyl record cutting machine, the actual cutting is performed by a machine with razor blades rather than by hand.
- Vinyl disc cutting can be done on either a computer-controlled or an analog machine. To cut a record on an analog machine, the user must manually adjust the razor blades and make certain that they are held properly before each cut.
- The main difference between vinyl disc and vinyl record cutting is that when using a vinyl record cutter, the actual cutting is performed by a machine with razor blades instead of by hand.
- In addition to producing records, many people use their vinyl cutter to create other types of art such as vases and bowls.
- When purchasing a digital audio source for use in vinyl discs or vinyl record cutting, it is important to purchase one that has been encoded with a 192-kbps bit rate. A lower bit rate will result in a lower-quality final product.
- When purchasing a digital audio source for use in vinyl discs or vinyl record cutting, it is important to purchase one that has been encoded with a 192-kbps bit rate. A lower bit rate will result in a lower-quality final product.
- When purchasing blank discs for use in vinyl discs or vinyl record cutting, make sure that the blank discs are clear and not opaque! If the blank disc is opaque, it can be difficult to see what you are doing!
- Some people like to ‘label’ their records by writing their own titles and/or artist names on the label before they cut their records! Others prefer to create custom labels that they print out on their computer printer and then tape onto the outside of the blank record or disc prior to cutting it!
- To cut your own vinyl records at home, you must first purchase a turntable and a record player. A turntable is a device that spins a vinyl disc at a high speed in order to create sound waves.
- A record player is a machine that plays vinyl records! This machine can be purchased used or new from one of the many online retailers such as eBay, Amazon, and Craigslist!
Conclusion
Vinyl record cutting is an easy and fun way to create a unique product that can be used for a variety of purposes. You can use a vinyl disc-cutting machine to create vinyl records from live DJ sets, mixtapes, podcasts, or even reel-to-reel tapes. Whatever your needs, vinyl record cutting is a great way to create high-quality vinyl records in small quantities.
